【软管泵路面抛丸机量少也做】

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.

生产工艺：本公司系列软管具有使用寿命长、适用范围广等特点，它结构是经过一层或多层高强度合成纤维编织层，增强了耐磨性、抗撕裂性软管的内衬和外衬均挤压成型，内衬采用一系列的复合橡胶。管体柔软，富有高强弹性，具有极优越的耐磨性能。采用新型原材料，增强管体的整体性能。在使用过程中生热低，弹性复原性好，经久耐用。胶管具有良好的耐正压和负压，具有良好的耐酸、碱、油、高温等特点，可以输送当今90%以上的化学品。主要成份有天然橡胶（耐一般的弱酸及酒精）、丁基橡胶（耐油脂、碱金属和清洁剂等）和三元乙丙橡胶（适用于酮、酒精及浓酸）等。软管的使用温度≤100℃，考虑生产过程中会产生热量，一般用于介质温度<80℃的工况。若在通风（或冷却）散热条件较好的情况下，介质温度可以到100℃。若物料温度≥120℃，需选用特殊耐热软管。输送有卫生级介质（如食品、医药等），可采用特制的卫生级软管。另可根据用户需要进行非标设计。